How to Install a Stair Handrail. How to build stairs. Building wood stair railing.
Well we're done with the risers and treads newel posts are in place and all
0:04we have to do is bridge the two
0:06I've got a piece a hand railing here that we're going to use I've got a
0:10little profile of this hand railing for my fingers are going to slide
0:14I've made those round grooves with this cold bit my router table
0:18I've also plowed a groove in the bottom of the and real to accept the tops of
0:22the balusters by using my miter box in my double gauge
0:27I've already cut the bottom of this piece of railing at the right angle
0:30we're going to but it into the post and setting it on top of all these nosings
0:35I'll markets length in place now our noodles are plumb this railing should
0:45fit in its correct position now that I've cut it to length
0:54let me show you how I arrived at this position down here is a mark that
1:00represents the front face of my riser and it's centered on our newer post
1:04I transferred that line up to the top here 30 inches from the top of the tread
1:09and with my bevel gauge
1:11I've marked the angle of the railing brought that line around Square to the
1:16front and that's where it sits
1:18i also did the same thing at the top now I'll run a few screws from the bottom
1:23side of the railing into the Newell and at the top and it'll be ready for
1:27balusters
1:34- guys use rail bolts for this connection but if you don't have one
1:39his legs were pretty well you can see this landing module has to be a lot
1:51taller than the starting role because this railing for the second flight is
1:55going to start way up here
1:57now on to the balusters
How to Install a Stair Handrail - How to build stairs | |
| 179 Likes | 179 Dislikes |
| 108,322 views views | followers |
| How-to & Style | Upload TimePublished on 19 Nov 2015 |
Không có nhận xét nào:
Đăng nhận xét